Помогите Карта мира

как сделать такую карту

 

dynmap
http://dev.bukkit.org/server-mods/dynmap/

 

если посмотреть внимательней
то мы увидим
что карта(на скрине) на оcнове maps.google.com

 

dynmap делает точно такую же карту

 

Это не dynmap, это называется Minecraft-Overviewer. Вот их сайт: http://overviewer.org/

 

А что лучше? Где меньше нагрузка на сервер?

 

dynmap на мой взгляд практичней на данный момент, из за возможности работы с ней, того же WB + виды обзоров миров и отдельного мира

 

Ну DynMap это динамическая карта, а Minecraft-Overviewer это статичная карта без авто обновления на основе гугол мапс, это даже не плагин. Так что нагрузка меньше у второго.

 

http://www.want2vote.com/files/mappers.php
cпс всем за помощь

 

Помогите пожалуйста решить проблемму, в плагине dynmap в текстурке нет блоков из redpower, соответственно на карте не отображаются мрамор, лампы и др. Как решить? Может кто может дать файлик png дополненный или не в нем дело? Если нужно dynmap с redpower подружить, чтоб текстуры добавились, подскажите как...

 

Вроде как в configuration.txt где-то в конце включить нужно поддержку ic2, redpower2 и т.п.
Правда, я включил, ic2 почти нормально рендерит, а вот кучу блоков из рп2 рендерит cobblestone'ом... может кто подскажет как вылечить?

 

configuration.txt
Просто убираем #
Было:

Код:

# Enable Industrial Craft 2 block rendering support (core, Advanced Machines, Charging Bench, Power Converters, Compact Solars)
#ic2-support: true
#ic2-advancesmachines-support: true
#ic2-chargingbench-support: true
#ic2-powerconverters-support: true
#ic2-compactsolars-support: true
 
# Enable BuildCraft block rendering support
#buildcraft-support: true
 
# Enable RedPower2 block rendering support
#redpower2-support: true
 
# Enable NetherOres block rendering support
#netherores-support: true
 
# Enable RailCraft block rendering support
#railcraft-support: true
 
# Enable Kaevator's Superslopes block rendering support
#superslopes-support: true
 
# Enabled ComputerCraft block rendering support
#computercraft-support: true
 
# Enabled LC Trees++ block rendering support
#lctrees-support: true
 
# Enable Forestry block rending support
#forestry-support: true

Надо:

Код:

# Enable Industrial Craft 2 block rendering support (core, Advanced Machines, Charging Bench, Power Converters, Compact Solars)
ic2-support: true
ic2-advancesmachines-support: true
ic2-chargingbench-support: true
ic2-powerconverters-support: true
ic2-compactsolars-support: true
 
# Enable BuildCraft block rendering support
buildcraft-support: true
 
# Enable RedPower2 block rendering support
redpower2-support: true
 
# Enable NetherOres block rendering support
netherores-support: true
 
# Enable RailCraft block rendering support
railcraft-support: true
 
# Enable Kaevator's Superslopes block rendering support
superslopes-support: true
 
# Enabled ComputerCraft block rendering support
computercraft-support: true
 
# Enabled LC Trees++ block rendering support
lctrees-support: true
 
# Enable Forestry block rending support
forestry-support: true

Ещо поддержка HD текстур
походу в 12 строке находим
deftemplatesuffix: блаааааа
и заменяем на
deftemplatesuffix: hires

 

Все это сделано, чтобы предметно обсуждать - выложу свой configuration.txt

Код:

# All paths in this configuration file are relative to Dynmap's data-folder: minecraft_server/plugins/dynmap/
 
# All map templates are defined in the templates directory
# The 'classic' FlatMap and KzedMap templates are used, which can be found in normal.txt, nether.txt, and skylands.txt
#  To use these, do not set deftemplatesuffix (make sure deftemplatesuffix is commented, below)
#
# To use the HDMap very-low-res map templates as world defaults (normal-vlowres, nether-vlowres and skylands-vlowres), uncomment the following line
#  The definitions of these templates are in normal-vlowres.txt, nether-vlowres.txt, and skylands-vlowres.txt
#deftemplatesuffix: vlowres
deftemplatesuffix: hires
#
# To use the HDMap low-res map templates as world defaults (normal-lowres, nether-lowres and skylands-lowres), uncomment the following line
#  The definitions of these templates are in normal-lowres.txt, nether-lowres.txt, and skylands-lowres.txt
#deftemplatesuffix: lowres
# To use the HDMap hi-res map templates (these can take a VERY long time for initial fullrender), comment the following line
#  The definitions of these templates are in normal-hires.txt, nether-hires.txt, and skylands-hires.txt
#deftemplatesuffix: hires
# Other values will search for templates named normal-<value>, nether-<value>, skylands-<value>
 
components:
  - class: org.dynmap.ClientConfigurationComponent
 
#  - class: org.dynmap.InternalClientUpdateComponent
#    sendhealth: true
#    sendposition: true
#    allowwebchat: false
#    webchat-interval: 5
#    hidewebchatip: false
#    trustclientname: false
#    includehiddenplayers: false
#    # (optional) if true, player login IDs will be used for web chat when their IPs match
#    use-player-login-ip: true
#    # (optional) if use-player-login-ip is true, setting this to true will cause chat messages not matching a known player IP to be ignored
#    require-player-login-ip: false
#    # (optional) block player login IDs that are banned from chatting
#    block-banned-player-chat: true
  #  # Optional - make players hidden when they are inside/underground/in shadows (#=light level: 0=full shadow,15=sky)
  #  hideifshadow: 4
  #  # Optional - make player hidden when they are under cover (#=sky light level,0=underground,15=open to sky)
  #  hideifundercover: 14
  #  # (Optional) if true, players that are crouching/sneaking will be hidden
  #  hideifsneaking: false
  - class: org.dynmap.JsonFileClientUpdateComponent
    writeinterval: 1
    sendhealth: true
    sendposition: true
    allowwebchat: false
    webchat-interval: 5
    hidewebchatip: false
    includehiddenplayers: false
  #  use-player-login-ip: false
  #  require-player-login-ip: false
  #  block-banned-player-chat: true
  #  hideifshadow: 0
  #  hideifundercover: 0
  #  hideifsneaking: false
 
  - class: org.dynmap.SimpleWebChatComponent
    allowchat: false
    # If true, web UI users can supply name for chat using 'playername' URL parameter.  'trustclientname' must also be set true.
    allowurlname: false
  #- class: org.dynmap.herochat.HeroWebChatComponent
  #  # Control which HeroChat channel messages from web are directed to
  #  herochatwebchannel: Global
  #  # Control which channels are monitored and reported to the web
  #  herochatchannels:
  #    - Global
  #    #- Trade
  #    #- Haggle
 
  # Note: this component is needed for the dmarker commands, and for the Marker API to be available to other plugins
  - class: org.dynmap.MarkersComponent
    type: markers
    showlabel: false
    enablesigns: false
    # (optional) add spawn point markers to standard marker layer
    showspawn: true
    spawnicon: world
    spawnlabel: "Spawn"
    # (optional) layer for showing offline player's positions
    showofflineplayers: false
    offlinelabel: "Offline"
    offlineicon: offlineuser
    offlinehidebydefault: true
    offlineminzoom: 0
    # (optional) layer for showing player's spawn beds
    showspawnbeds: false
    spawnbedlabel: "Spawn Beds"
    spawnbedicon: bed
    spawnbedhidebydefault: true
    spawnbedminzoom: 0
    spawnbedformat: "%name%'s bed"
   
  - class: org.dynmap.ClientComponent
    type: chat
    allowurlname: false
  - class: org.dynmap.ClientComponent
    type: chatballoon
    focuschatballoons: false
  - class: org.dynmap.ClientComponent
    type: chatbox
    showplayerfaces: true
    messagettl: 5
    # Optional: set number of lines in scrollable message history: if set, messagettl is not used to age out messages
    #scrollback: 100
  - class: org.dynmap.ClientComponent
    type: playermarkers
    showplayerfaces: true
    showplayerhealth: false
    # Option to make player faces small - don't use with showplayerhealth
    smallplayerfaces: false
    # Optional - make player faces layer hidden by default
    hidebydefault: false
    # Optional - ordering priority in layer menu (low goes before high - default is 0)
    layerprio: 0
    # Optional - label for player marker layer (default is 'Players')
    label: "Players"
   
  #- class: org.dynmap.ClientComponent
  #  type: digitalclock
  - class: org.dynmap.ClientComponent
    type: link
   
  - class: org.dynmap.ClientComponent
    type: timeofdayclock
    showdigitalclock: true
    #showweather: true
  # Mouse pointer world coordinate display
  - class: org.dynmap.ClientComponent
    type: coord
    label: "Location"
    hidey: false
   
  #- class: org.dynmap.ClientComponent
  #  type: logo
  #  text: "Dynmap"
  #  #logourl: "images/block_surface.png"
  #  linkurl: "http://forums.bukkit.org/threads/dynmap.489/"
 
  #- class: org.dynmap.ClientComponent
  #  type: inactive
  #  timeout: 1800 # in seconds (1800 seconds = 30 minutes)
  #  redirecturl: inactive.html
  #  #showmessage: 'You were inactive for too long.'
 
  #- class: org.dynmap.TestComponent
  #  stuff: "This is some configuration-value"
 
# Treat hiddenplayers.txt as a whitelist for players to be shown on the map? (Default false)
display-whitelist: false
 
# How often a tile gets rendered (in seconds).
renderinterval: 1
 
# How many tiles on update queue before accelerate render interval
renderacceleratethreshold: 60
 
# How often to render tiles when backlog is above renderacceleratethreshold
renderaccelerateinterval: 0.2
 
# How many update tiles to work on at once (if not defined, default is 1/2 the number of cores)
tiles-rendered-at-once: 2
 
# If true, use normal priority threads for rendering (versus low priority) - this can keep rendering
# from starving on busy Windows boxes (Linux JVMs pretty much ignore thread priority), but may result
# in more competition for CPU resources with other processes
usenormalthreadpriority: true
 
# Save and restore pending tile renders - prevents their loss on server shutdown or /reload
saverestorepending: true
 
# Zoom-out tile update period - how often to scan for and process tile updates into zoom-out tiles (in seconds)
zoomoutperiod: 30
 
# Tile hashing is used to minimize tile file updates when no changes have occurred - set to false to disable
enabletilehash: true
 
# Optional - control darkening of biome-shaded colors in swamp biomes (1.9+) - default is true for 1.9+, false for 1.8.x
#swampshaded: false
# Optional - control biome shading of water (1.9+) - default is true for 1.9+, false for 1.8.x
#waterbiomeshaded: false
 
# Optional - hide ores: render as normal stone (so that they aren't revealed by maps)
#hideores: true
 
# Optional - control rendering of fences (joining to blocks, as in 1.9+) - default is true for 1.9+, false for 1.8.x
#fence-to-block-join: true
 
# Optional - enabled BetterGrass style rendering of grass and snow block sides
#better-grass: true
 
# Pre 0.29 render options - set all three to false if you want same results as 0.28 (i.e. you have existing maps and don't want to render)
#  use-generated-textures: if true, use generated textures (same as client); false is static, pre 0.29 textures
#  correct-water-lighting: if true, use corrected water lighting (same as client); false is legacy, pre 0.29 water (darker)
#  correct-biome-shading: if true, use fixed color mappings for birch, pine, lily, and proper water shading (same as client); false is pre 0.29
use-generated-textures: true
correct-water-lighting: true
correct-biome-shading: true
 
# Control loading of player faces (if set to false, skins are never fetched)
#fetchskins: false
 
# Control updating of player faces, once loaded (if faces are being managed by other apps or manually)
#refreshskins: false
 
# Control behavior for new (1.9+) compass orientation (sunrise moved 90 degrees: east is now what used to be south)
#  default is 'pre19' for 1.8 server (existing orientation), 'newrose' for 1.9+ (preserve maps, rotate rose)
#  'newnorth' is used to rotate maps and rose (requires fullrender of any HDMap map - same as 'newrose' for FlatMap or KzedMap)
compass-mode: newnorth
 
# Enable Industrial Craft 2 block rendering support
ic2-support: true
 
# Enable BuildCraft block rendering support
buildcraft-support: true
 
# Enable RedPower2 block rendering support
redpower2-support: true
 
render-triggers:
  - chunkloaded
#  - playermove
#  - playerjoin
  - blockplaced
  - blockbreak
#  - leavesdecay
  - blockburn
  - chunkgenerated
  - blockformed
  - blockfaded
  - blockspread
  - pistonmoved
  - explosion
  - blockfromto
  - blockphysics
 
# Title for the web page - if not specified, defaults to the server's name (unless it is the default of 'Unknown Server')
webpage-title: "Карта Мира Industrial Age"
 
# The path where the tile-files are placed.
tilespath: web/tiles
 
# The path where the web-files are located.
webpath: web
 
# The network-interface the webserver will bind to (0.0.0.0 for all interfaces, 127.0.0.1 for only local access).
webserver-bindaddress: 0.0.0.0
 
# The TCP-port the webserver will listen on.
webserver-port: 8123
 
# Maximum concurrent session on internal web server - limits resources used in Bukkit server
max-sessions: 30
 
# Disables Webserver portion of Dynmap (Advanced users only)
disable-webserver: true
 
# Enable/disable having the web server allow symbolic links (true=compatible with existing code, false=more secure (default))
allow-symlinks: true
 
# Period between tile renders for fullrender, in seconds (non-zero to pace fullrenders, lessen CPU load)
timesliceinterval: 0.0
 
# Maximum chunk loads per server tick (1/20th of a second) - reducing this below 90 will impact render performance, but also will reduce server thread load
maxchunkspertick: 200
 
# Progress report interval for fullrender/radiusrender, in tiles.  Must be 100 or greater
progressloginterval: 100
 
# Parallel fullrender: if defined, number of concurrent threads used for fullrender or radiusrender
#  Note: setting this will result in much more intensive CPU use, some additional memory use.  Caution should be used when
#  setting this to equal or exceed the number of physical cores on the system.
#parallelrendercnt: 4
 
# Interval the browser should poll for updates.
updaterate: 2000
 
# If nonzero, server will pause fullrender/radiusrender processing when 'fullrenderplayerlimit' or more user's are logged in
fullrenderplayerlimit: 0
 
showplayerfacesinmenu: true
 
# Control whether players that are hidden or not on current map are grayed out (true=yes)
grayplayerswhenhidden: true
 
# Set sidebaropened: 'true' to pin menu sidebar opened permanently, 'pinned' to default the sidebar to pinned, but allow it to unpin
#sidebaropened: true
 
# Customized HTTP response headers - add 'id: value' pairs to all HTTP response headers (internal web server only)
#http-response-headers:
#    Access-Control-Allow-Origin: "my-domain.com"
#    X-Custom-Header-Of-Mine: "MyHeaderValue"
 
joinmessage: "%playername% joined"
quitmessage: "%playername% quit"
spammessage: "You may only chat once every %interval% seconds."
# format for messages from web: %playername% substitutes sender ID (typically IP), %message% includes text
webmsgformat: "&color;2[WEB] %playername%: &color;f%message%"
 
# Control whether layer control is presented on the UI (default is true)
showlayercontrol: true
 
# Enable checking for banned IPs via banned-ips.txt (internal web server only)
check-banned-ips: true
 
# Default selection when map page is loaded
defaultzoom: 3
defaultworld: world
defaultmap: surface
# (optional) Zoom level and map to switch to when following a player, if possible
#followzoom: 3
#followmap: surface
 
# Option to enable workaround for incorrectly encoded unicode in Cyrillic MC/Bukkit (not good for other code pages)
cyrillic-support: false
 
# If true, make persistent record of IP addresses used by player logins, to support web IP to player matching
persist-ids-by-ip: true
 
# Messages to customize
msg:
    maptypes: "Map Types"
    players: "Players"
 
# NOTE: the 'templates' section is now found in the 'templates' directory
#  Templates CAN still be defined in configuration.txt, as before 0.20
templates:
 
# NOTE: the 'worlds' section is now found in the worlds.txt (example custom settings can be found in worlds.txt.sample)
#  Worlds CAN still be defined in configuration.txt, as before 0.20
worlds:
 
# Set to true to enable verbose startup messages - can help with debugging map configuration problems
# Set to false for a much quieter startup log
verbose: false
 
# Enables debugging.
#debuggers:
#  - class: org.dynmap.debug.LogDebugger